Package:
1pc access control (Standalone Card Access Control Without software)
1pc Boly Lock
1pc power supply
1pc exit button
Specifications:
1. Capacity :500
2. Card Type:RFID and mifare card
3. Work distance:RF:1-15CM MF:1-7CM
4. Identify speed:<=1s
5. Work voltage:12VDC±10%
6. Work currency:<100mA
7. Work temperatrue:0-70
8. Relative humidity:20%RH-80%RH
9. Unlocking ciper:1 Group
10. Unlocking ways:Card ,pin ,card +pin
11. Weigand: NO
12. Size:117x117x21mm
13.weight:100g
Power Supply:
Specifications:
100% Brand New.
Size: Approx. 120 x 95 x 38mm(L x W x H)
Input voltage: 110~240v
Input Frequency: 50~60Hz
Output voltage: DC 12V
Output Current: 3A
Output voltage trim range: ±10%~ ±15%
Insulation voltage: Junior/sub-polar inter-1500v ac, primary/shell between 1500V AC, subpolar/shell between 500V AC
Hold time: full load typically 20ms
Operating temperature: -20~ ±35 degree
Overload protection: All output in a short circuit, overload are protected; Power output of 0-15 seconds delay locks
Magnetic Lock:
Color: Silver
Material: Aluminium Alloy
Working Voltage: DC 12V
Working Current:
Ordinary Mode:
Start State: 450mA
Persistent State: 450mA
Normal Mode:
Start State: 750mA
Persistent State: 180mA
Lock Mode: Magnetic Induction
Lock Size: 20.3 * 3.4 * 4.2cm / 8 * 1.34 * 1.65in (L * W * H)
Lock Weight: 425g / 15oz
Face Plate Size: 21.3 * 4.2cm / 8.4 * 1.65in (L * W)
Face Plate Weight: 31g / 1.08oz
Magnetic Base Size: 9 * 2.5cm / 3.54 * 0.98in (L * W)
Magnetic Base Weight: 16g / 0.58oz
Package Weight: 500g / 17.6oz
Exit button:
